 |
XG-1A型工程纖維強伸度可用於測6
mm以下長度的短纖維工程材料,採用特殊齛c設計的夾持器,用XGD-1A型纖維直徑測測得纖維直徑K入器,計算纖維洙位截面積的強力,其強度和模量洙位採用MPa。
The XG-1A Engineering Fiber Tensile Tester is used to
implement the tensile test of engineering staple fibers with the length less
than 6 mm. The fiber sample is clamped with specially designed clamps. The fiber
diameter, measured with the XGD-1 Fiber Diameter Tester, is input into the
apparatus to calculate the tensile strength per unit cross-section area of the
fiber. The unit of tenacity and modulus is MPa. |
主要技術指A
1、 負測量範圍: 0∼100 cN;
2、 負測量誤差: ≤±1%;
3、 負測量析度: 0.1 cN;
4、 伸長測量範圍: 100mm;
5、 伸長測量誤差: ≤0.05mm;
6、 伸長測量析度: 0.1%;
7、 下夾持器下降速度: 1∼100 mm/min;
8、 下夾持器動程: 100 mm;
9、 資料介面: RS232,可踇振動式N度;
10、電源: 220V∼±10%;
11、主陜重量與尺寸: 約45kg,540×434×560mm。
器懅述
XG-1A型工程纖維強伸度是測定工程纖維拉伸性能的器,可對最短4mm長度的工程用短纖維進行一次拉伸,顯示纖維強力、伸長率、定伸長負、直徑、強度、模量及比功的洙值、平均值和變係。器附有配套用的XGD-1A型工程纖維直徑測,可對圓形纖維的直徑和非圓形截面纖維的峸蘆蔭|進行測。
器符合國家(ch見n)A準GB/T
21120、國際A準ISO5079和國際化纖維A準化局(BISFA)的方法A準,可廣泛R用於化纖、建築工程峊芠ㄔ禶~、檢陜構和科研洙位。
|